| 1. |
- Sahoo, Smruti, et al.
(författare)
-
System-level assessment of a partially distributed hybrid electric propulsion system
- 2022
-
Ingår i: Proceedings of the ASME Turbo Expo. - : American Society of Mechanical Engineers (ASME). - 9780791885970
-
Konferensbidrag (refereegranskat)abstract
- Hybrid electric propulsion system based aircraft designs are paving the path towards a future greener aviation sector and thus, have been the major focus of the aeronautical community. The fuel efficiency improvements of such propulsion system configurations are realized at the aircraft level. In order to assess such benefits, a radical shift in the sub-system modeling requirements and an integrated conceptual aircraft design environment is necessary. This work highlights performance model development work pertaining to different hybrid electric propulsion system components and development of a design platform which facilitates tighter integration of different novel propulsion system disciplines at aircraft level. Furthermore, a serial/parallel partially distributed hybrid electric propulsion system is chosen as the candidate configuration to assess the potential benefits and associated trade-offs by conducting multidisciplinary design space exploration studies. It is established that the distributed hybrid electric configurations pose the potential for aircraft structural weight reduction benefits. The study further illustrates the impacts from onboard charging during the low thrust requirement segments, quantitatively. It is highlighted that the amount of off-take power extraction for onboard charging of the battery is limited due to engine operability and higher specific fuel consumption issues. Though provisioning of onboard charging lowers the potential for block fuel savings, improvement in battery specific energy can make it more promising, which is also dependent on the hybridization power level. It is established that distributed propulsion system configurations particularly benefit from a high aspect ratio wing structure, which manifests for high hybridization power levels. A high voltage level transmission system with more efficient electrical components, enhances opportunities for achieving block fuel saving benefits.
|
|
| 2. |
- Sielemann, Michael, et al.
(författare)
-
Select trade-offs in parallel hybrid turboprop cycle design
- 2022
-
Ingår i: Proceedings of the ASME Turbo Expo. - : American Society of Mechanical Engineers (ASME). - 9780791885970
-
Konferensbidrag (refereegranskat)abstract
- Parallel hybrid turboprop engines propose a means to reduce fuel consumption of regional aircraft due to lower flight velocities. They feature an electric drive, typically on the free power turbine, and require a design trade-off between the gas turbine and electric power sub-system characteristics. Degrees of freedom include the nozzle expansion, the propeller power loading, the gear ratio, and the selection of shaft speeds. The latter for instance requires a trade-off between propeller and free power turbine efficiency. For a parallel hybrid, the electric machine efficiency becomes a third factor to consider. The objective of this paper is to expose some key aspects of these trade-offs in terms of efficiency and weight. The paper applies sophisticated methodology in both the gas turbine and electrical power domains. For the gas turbine, multi-point design is used. Here, an extension of established synthesis matching schemes is used, which covers the design and operation rules also for the electric components of the hybrid. For the electrical machine, fully analytical sizing is used, which also captures the impact of cooling. For all main gas turbine components and the electric machine, the geometry is estimated based on the sizing methodology, and used as input for the weight estimation. Results are presented for parallel hybrid electric 2.5-spool geared turboprop architectures fulfilling requirements of a notional 19 passenger regional aircraft. Uninstalled fuel consumption can be lower for the hybrid than the conventional baseline, and the key relations to typical cycle parameters such as overall pressure ratio and shaft speed selection are exposed. Overall, the benefit of hybridization is low however with the concept of operations inspired by hybrid turbofans. This is related to differences in contradicting cycle design requirements.
|
|
